Tissue-Penetrating Ultrasound-Triggered Hydrogel for Promoting Microvascular Network Reconstruction.

The microvascular network plays an important role in providing nutrients to the injured tissue and exchanging various metabolites. However, how to achieve efficient penetration of the injured tissue is an important bottleneck restricting the reconstruction of microvascular network. Herein, the hydrogel precursor solution can efficiently penetrate the damaged tissue area, and ultrasound triggers the release of thrombin from liposomes in the solution to hydrolyze fibrinogen, forming a fibrin solid hydrogel network in situ with calcium ions and transglutaminase as catalysts, effectively solving the penetration impedance bottleneck of damaged tissues and ultimately significantly promoting the formation of microvascular networks within tissues. First, the fibrinogen complex solution is effectively permeated into the injured tissue. Second, ultrasound triggered the release of calcium ions and thrombin, activates transglutaminase, and hydrolyzes fibrinogen. Third, fibrin monomers are catalyzed to form fibrin hydrogels in situ in the damaged tissue area. In vitro studies have shown that the fibrinogen complex solution effectively penetrated the artificial bone tissue within 15 s after ultrasonic triggering, and formed a hydrogel after continuous triggering for 30 s. Overall, this innovative strategy effectively solved the problem of penetration resistance of ultrasound-triggered hydrogels in the injured tissues, and finally activates in situ microvascular networks regeneration.

High-efficient separation of deoxyribonucleic acid from pathogenic bacteria by hedgehog-inspired magnetic nanoparticles microextraction.

Efficient separation of deoxyribonucleic acid (DNA) through magnetic nanoparticles (MN) is a widely used biotechnology. Hedgehog-inspired MNs (HMN) possess a high-surface-area due to the distinct burr-like structure of hedgehog, but there is no report about the usage of HMN for DNA extraction. Herein, to improve the selection of MN and illustrate the performance of HMN for DNA separation, HMN and silica-coated Fe3O4 nanoparticles (Fe3O4@SiO2) were fabricated and compared for the high-efficient separation of pathogenic bacteria of DNA. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) are typical Gram-negative and Gram-positive bacteria and are selected as model pathogenic bacteria. To enhance the extraction efficiency of two kinds of MNs, various parameters, including pretreatment, lysis, binding and elution conditions, have been optimized in detail. In most separation experiments, the DNA yield of HMN was higher than that of Fe3O4@SiO2. Therefore, a HMN-based magnetic solid-phase microextraction (MSPE) and quantitative real-time PCR (qPCR) were integrated and used to detect pathogenic bacteria in real samples. Interestingly, the HMN-based MSPE combined qPCR strategy exhibited high sensitivity with a limit of detection of 2.0 × 101 CFU mL-1 for E. coli and 4.0 × 101 CFU mL-1 for S. aureus in orange juice, and 2.8 × 102 CFU mL-1 for E. coli and 1.1 × 102 CFU mL-1 for S. aureus in milk, respectively. The performance of the proposed strategy was significantly better than that of commercial kit. This work could prove that the novel HMN could be applicable for the efficient separation of DNA from complex biological samples.

Enhanced hydrodechlorination of 4-chlorophenol through carboxymethylcellulose-modified Pd/Fe nanosuspension synthesized by one-step methods.

Palladized iron (Pd/Fe) represents one of the most common modification strategies for nanoscale zero-valent iron (nZVI). Most studies prepared Pd/Fe by reducing iron salts and depositing Pd species on the surface of pre-synthesized nZVI, which can be called the two-step method. In this study, we proposed a one-step method to obtain Pd/Fe by the concurrent formation of Fe0 and Pd0 and investigated the effects of these two methods on 4-chlorophenol (4-CP) removal, with carboxymethylcellulose (CMC) coated as a surface modifier. Results indicated that the one-step method, not only streamlined the synthesis process, but also Pd/Fe-CMCone-step, synthesized by it, exhibited a higher 4-CP removal rate (97.9%) compared to the two-step method material Pd/Fe-CMCtwo-step (82.4%). Electrochemical analyses revealed that the enhanced activity of Pd/Fe-CMCone-step was attributed to its higher electron transfer efficiency and more available reactive species, active adsorbed hydrogen species (Hads*). Detection of intermediate products demonstrated that, under the influence of Pd/Fe-CMCone-step, the main route of 4-CP was through hydrodechlorination (HDC) to form phenol and H* was the main active specie, supported by EPR tests, quenching experiments and product analysis. Additionally, the effects of initial 4-CP concentration, initial pH, O2 concentration, anions such as Cl-, SO42-, HCO3-, and humic acid (HA) were also investigated. In conclusion, the results of this study suggest that Pd/Fe-CMCone-step, synthesized through the one-step method, is a convenient and efficient nZVI-modifying material suitable for the HDC of chlorinated organic compounds.

Study on Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting.

Laser-based additive manufacturing has garnered significant attention in recent years as a promising 3D-printing method for fabricating metallic components. However, the surface roughness of additive manufactured components has been considered a challenge to achieving high performance. At present, the average surface roughness (Sa) of AM parts can reach high levels, greater than 50 µm, and a maximum distance between the high peaks and the low valleys of more than 300 µm, which requires post machining. Therefore, laser polishing is increasingly being utilized as a method of surface treatment for metal alloys, wherein the rapid remelting and resolidification during the process significantly alter both the surface quality and subsurface material properties. In this paper, the surface roughness, microstructures, microhardness, and wear resistance of the as-received, continuous wave laser polishing (CWLP), and pulsed laser polishing (PLP) processed samples were investigated systematically. The results revealed that the surface roughness (Sa) of the as-received sample was 6.29 µm, which was reduced to 0.94 µm and 0.84 µm by CWLP and PLP processing, respectively. It was also found that a hardened layer, about 200 µm, was produced on the Ti6Al4V alloy surface after laser polishing, which can improve the mechanical properties of the component. The microhardness of the laser-polished samples was increased to about 482 HV with an improvement of about 25.2% compared with the as-received Ti6Al4V alloy. Moreover, the coefficient of friction (COF) was slightly reduced by both CWLP and LPL processing, and the wear rate of the surface layer was improved to 0.790 mm3/(N∙m) and 0.714 mm3/(N∙m), respectively, under dry fraction conditions.

Passively Q-switched Nd3+ solid-state lasers with hexakis-[(trimethylsilyl)ethynyl]benzene and graphdiyne as saturable absorbers.

In this paper, two-dimensional Graphdiyne and Hexakis-[(trimethylsilyl)ethynyl]benzene nanosheets were prepared using the liquid-phase exfoliation method and were then successfully applied to 1.06 µm passively Q-Switched all-solid-state lasers. The Hexakis-[(trimethylsilyl)ethynyl]benzene was applied for the first time in passively Q-Switched all-solid-state lasers, as we know. For Graphdiyne, the Q-Switched pulse achieved a narrowest pulse width of 415 ns, a maximum repetition frequency of 244.2 kHz, a maximum pulse energy of 133.53 nJ, and peak power of 321.77 mW was obtained. While, the narrowest pulse width, maximum repetition frequency, maximum pulse energy, and peak power for Hexakis-[(trimethylsilyl)ethynyl]benzene are approximately 398.4 ns, 297.1 kHz, 89.61 nJ, and 220.39 mW respectively. The findings demonstrate the promising potential of both candidates as saturable absorbers for signal modulation in solid-state lasers.

Governance of Friedrich-Wintgen bound states in the continuum by tuning the internal coupling of meta-atoms.

Bound state in the continuum (BIC) is a phenomenon that describes the perfect confinement of electromagnetic waves despite their resonant frequencies lying in the continuous radiative spectrum. BICs can be realized by introducing a destructive interference between distinct modes, referred to as Friedrich-Wintgen BICs (FW-BICs). Herein, we demonstrate that FW-BICs can be derived from coupled modes of individual split-ring resonators (SRR) in the terahertz band. The eigenmode results manifest that FW-BICs are in the center of the far-field polarization vortices. Quasi-BIC-I keeps an ultrahigh quality factor (Q factor) in a broad momentum range along the Γ-X direction, while the Q factor of the quasi-BIC-II drops rapidly. Our results can facilitate the design of devices with high-Q factors with extreme robustness against the incident angle.

Comparison of the Efficacy Among Nilotinib, Dasatinib, Flumatinib and Imatinib in Newly Diagnosed Chronic-Phase Chronic Myeloid Leukemia Patients: A Real-World Multi-Center Retrospective Study.

BACKGROUND: There are limited data comprehensively comparing therapy responses and outcomes among nilotinib, dasatinib, flumatinib and imatinib for newly diagnosed chronic-phase chronic myeloid leukemia in a real-world setting. PATIENTS AND METHODS: Data from patients with chronic-phase CML receiving initial a second-generation tyrosine-kinase inhibitor (2G-TKI, nilotinib, dasatinib or flumatinib) or imatinib therapy from 77 Chinese centers were retrospectively interrogated. Propensity-score matching (PSM) analyses were performed to to compare therapy responses and outcomes among these 4 TKIs. RESULTS: 2,496 patients receiving initial nilotinib (n = 512), dasatinib (n = 134), flumatinib (n = 411) or imatinib (n = 1,439) therapy were retrospectively interrogated in this study. PSM analyses indicated that patients receiving initial nilotinib, dasatinib or flumatinib therapy had comparable cytogenetic and molecular responses (p = .28-.91) and survival outcomes including failure-free survival (FFS, p = .28-.43), progression-free survival (PFS, p = .19-.93) and overall survival (OS) (p values = .76-.78) but had significantly higher cumulative incidences of cytogenetic and molecular responses (all p values < .001) and higher probabilities of FFS (p < .001-.01) than those receiving imatinib therapy, despite comparable PFS (p = .18-.89) and OS (p = .23-.30). CONCLUSION: Nilotinib, dasatinib and flumatinib had comparable efficacy, and significantly higher therapy responses and higher FFS rates than imatinib in newly diagnosed CML patients. However, there were no significant differences in PFS and OS among these 4 TKIs. These real-world data may provide additional evidence for routine clinical assessments to identify more appropriate therapies.

Injectable Nano-Micro Composites with Anti-bacterial and Osteogenic Capabilities for Minimally Invasive Treatment of Osteomyelitis.

The effective management of osteomyelitis remains extremely challenging due to the difficulty associated with treating bone defects, the high probability of recurrence, the requirement of secondary surgery or multiple surgeries, and the difficulty in eradicating infections caused by methicillin-resistant Staphylococcus aureus (MRSA). Hence, smart biodegradable biomaterials that provide effective and precise local anti-infection effects and can promote the repair of bone defects are actively being developed. Here, a novel nano-micro composite is fabricated by combining calcium phosphate (CaP) nanosheets with drug-loaded GelMA microspheres via microfluidic technology. The microspheres are covalently linked with vancomycin (Van) through an oligonucleotide (oligo) linker using an EDC/NHS carboxyl activator. Accordingly, a smart nano-micro composite called "CaP@MS-Oligo-Van" is synthesized. The porous CaP@MS-Oligo-Van composites can target and capture bacteria. They can also release Van in response to the presence of bacterial micrococcal nuclease and Ca2+, exerting additional antibacterial effects and inhibiting the inflammatory response. Finally, the released CaP nanosheets can promote bone tissue repair. Overall, the findings show that a rapid, targeted drug release system based on CaP@MS-Oligo-Van can effectively target bone tissue infections. Hence, this agent holds potential in the clinical treatment of osteomyelitis caused by MRSA.

White matter hyperintensity burden and collateral circulation in acute ischemic stroke with large artery occlusion.

OBJECTIVE: This study aimed to investigate the association between white matter hyperintensity (WMH) burden and pial collaterals in acute strokes caused by intracranial large artery occlusion treated with mechanical thrombectomy in the anterior circulation, focusing on stroke subtypes. METHODS: Consecutive patients undergoing mechanical thrombectomy between December 2019 and June 2022 were retrospectively screened. The Fazekas scale assessed WMH burden. Pial collaterals were categorized as either poor (0-2) or good (3-4) based on the Higashida score. A multivariable analysis was used to determine the relationship between WMH burden and pial collaterals. Subgroup analyses delved into associations stratified by stroke subtypes, namely cardioembolism (CE), tandem lesions (TLs), and intracranial atherosclerosis (ICAS). RESULTS: Of the 573 patients included, 274 (47.8%) demonstrated poor pial collaterals. Multivariable regression indicated a strong association between extensive WMH burden (Fazekas score of 3-6) and poor collaterals [adjusted OR 3.04, 95% CI 1.70-5.46, P < 0.001]. Additional independent predictors of poor collaterals encompassed ICAS-related occlusion (aOR 0.26, 95% CI 0.09-0.76, P = 0.014), female sex (aOR 0.63, 95% CI 0.41-0.96, P = 0.031), and baseline Alberta Stroke Program Early Computed Tomography scores (aOR 0.80, 95% CI 0.74-0.88, P < 0.001). Notably, an interaction between extensive WMH burden and stroke subtypes was observed in predicting poor collaterals (P = 0.001), being pronounced for CE (adjusted OR 2.30, 95% CI 1.21-4.37) and TLs (adjusted OR 5.09, 95% CI 2.32-11.16), but was absent in ICAS (adjusted OR 1.24, 95% CI 0.65-2.36). CONCLUSIONS: Among patients treated with mechanical thrombectomy for anterior circulation large artery occlusion, extensive WMH burden correlates with poor pial collaterals in embolic occlusion cases (CE and TLs), but not in ICAS-related occlusion.

A review of 17 cases of mesenteric panniculitis in Zhengzhou Ninth People's Hospital in China.

PURPOSE: Mesenteric panniculitis (MP) represents the uncommon, benign and chronic inflammatory disorder affecting the mesenteric adipose tissues. Its etiology, diagnosis and treatment remain unnoticed. Our report focused on shedding more lights on this condition. PATIENTS AND METHODS: Seventeen MP patients were identified by searching the electronic medical record system in the Zhengzhou Ninth People's Hospital using the search terms "Mesenteric panniculitis" from October 2015 to March 2023. All cases were diagnosed with MP through computed tomography (CT). Their clinical features and treatments were analyzed. RESULTS: There were altogether 17 cases enrolled for this analysis. The male to female ratio was 8:9, and the median age at diagnosis was 64 (range: 37-96) years. There were 15 patients (88.2%) showing abdominal pain to varying degrees. The proportions of symptoms of nausea, vomiting and fever were 23.5%, 23.5% and 41.2%, respectively. Neoplastic disease was present in 3 patients (17.6%). Meanwhile, 9 patients (52.9%) had gallstones, 3 (17.6%) had cholecystitis and 1 (5.9%) had gallbladder polyps. Six patients (35.3%) received antibiotics treatment only and 1 (5.9%) received oral antibiotics and prednisone. One patient (5.9%) received antibiotics followed by prednisone treatment, because the symptoms were significantly relieved after antibiotic treatment, while the disease recurred soon after, and the symptoms improved again after prednisone treatment. The abdominal pain in 9 patients (52.9%) was relieved spontaneously. Two patients (11.8%) died, including one due to respiratory failure caused by pneumonia and the other one because of pancreatic cancer with lung and liver metastases. CONCLUSION: MP is a poorly understood chronic inflammatory disease. Patients often have abdominal pain as the main symptom, accompanied by comorbidities in the gallbladder, and the prognosis is usually good after correct diagnosis and treatment, Therefore, the present report aims to promote the awareness among clinicians of patients with non-classic abdominal symptoms, so as to avoid misdiagnosis or missed diagnosis.

Stability and function of RCL1 are dependent on the interaction with BMS1.

During ribosome biogenesis, the small subunit (SSU) processome is responsible for 40S assembly. The BMS1/RCL1 complex is a core component of the SSU processome that plays an important role in 18S rRNA processing and maturation. Genetic studies using zebrafish mutants indicate that both Bms1-like (Bms1l) and Rcl1 are essential for digestive organ development. In spite of vital functions of this complex, the mutual dependence of these two nucleolar proteins for the stability and function remains elusive. In this study, we identified an RCL1-interacting domain in BMS1, which is conserved in zebrafish and humans. Moreover, both the protein stability and nucleolar entry of RCL1 depend on its interaction with BMS1, otherwise RCL1 degraded through the ubiquitination-proteasome pathway. Functional studies revealed that overexpression of RCL1 in BMS1-knockdown cells can partially rescue the defects in 18S rRNA processing and cell proliferation, and hepatocyte-specific overexpression of Rcl1 can resume zebrafish liver development in the bms1l substitution mutant bms1lsq163/sq163but not in the knockout mutant bms1lzju1/zju1, which is attributed to the nucleolar entry of Rcl1 in the former mutant. Our data demonstrate that BMS1 and RCL1 interaction is essential for not only pre-rRNA processing but also the communication between ribosome biogenesis and cell cycle regulation.

Microwave Encounters Ionic Liquid: Synergistic Mechanism, Synthesis and Emerging Applications.

Progress in microwave (MW) energy application technology has stimulated remarkable advances in manufacturing and high-quality applications of ionic liquids (ILs) that are generally used as novel media in chemical engineering. This Review focuses on an emerging technology via the combination of MW energy and the usage of ILs, termed microwave-assisted ionic liquid (MAIL) technology. In comparison to conventional routes that rely on heat transfer through media, the contactless and unique MW heating exploits the electromagnetic wave-ions interactions to deliver energy to IL molecules, accelerating the process of material synthesis, catalytic reactions, and so on. In addition to the inherent advantages of ILs, including outstanding solubility, and well-tuned thermophysical properties, MAIL technology has exhibited great potential in process intensification to meet the requirement of efficient, economic chemical production. Here we start with an introduction to principles of MW heating, highlighting fundamental mechanisms of MW induced process intensification based on ILs. Next, the synergies of MW energy and ILs employed in materials synthesis, as well as their merits, are documented. The emerging applications of MAIL technologies are summarized in the next sections, involving tumor therapy, organic catalysis, separations, and bioconversions. Finally, the current challenges and future opportunities of this emerging technology are discussed.

Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface.

Laser polishing is a noncontact and efficient processing method for surface treatment of different materials. It removes surface material and improves its quality by means of a laser beam that acts directly on the surface of the material. The material surface roughness is a major criterion that evaluates the polishing effect when alumina ceramics are polished by a laser. In this study, the effects of three factors, namely, laser power, scanning speed, and pulse frequency, on the surface roughness were investigated through orthogonal tests. The optimum polishing parameters were obtained through a comparison of the experimental results. Compared to the initial surface roughness (Ra = 1.624 µm), the roughness of the polished surface was reduced to Ra = 0.549 µm. A transient two-dimensional model was established by the COMSOL Multiphysics 5.5, and the flow condition of the material inside the molten pool of laser-polished alumina ceramics and the surface morphology of the smoothing process were investigated by utilizing the optimal polishing parameters obtained from the experiments. The simulation results showed that in the process of laser polishing, the fluid inside the molten pool flowed from the peaks to the valleys under the action of capillary force, and the inside of the molten pool tended to be smoothened gradually. In order to verify the correctness of the numerical model, the surface profile at the same position on the material surface was compared, and the results showed that the maximum error between the numerical simulation and the experimental results was 17.8%.

Microbial carbonate reservoir characteristics and their depositional effects, the IV Member of Dengying Formation, Gaoshiti-Moxi area, Sichuan Basin, Southwest China.

Previous scientific research on reservoirs of the Deng IV Member in the Gaoshiti-Moxi area, the main production area of the Anyue gas field with reserves of tens of billions of cubic metres, has focused on karst palaeogeomorphology reconstruction, the facies distribution on platform margins, and their effects on creating favourable reservoirs. However, the quality of microbial carbonate reservoirs is also closely related to their original depositional environments on both inner and marginal platforms. Therefore, this paper attempts to reveal favourable microbial carbonate reservoir characteristics and the sedimentary effects on their distribution and prediction based predominantly on a synthetic analysis of the sequence stratigraphy and depositional facies. The results show that favourable reservoirs of the Deng IV Member are classified into three types according to their reservoir spaces: fracture-cavity, pore-cavity and pore reservoirs. Secondary dissolution pores and cavities are primary reservoir spaces developed mainly in nonskeletal grain dolomites with sparry cements, thrombolites, and stromatolites. The physical properties of the fracture-cavity and pore-cavity types of reservoirs are better than those of pore reservoirs and have porosities between 1 and 5% and permeabilities between 0.01 × 10-3 and 1 × 10-3 µm2. Vertically, favourable reservoirs are developed mainly in parasequence set 6 (PSS6) and PSS7 and are laterally distributed in well zone MX9-MX19-MX1 for the fracture-cavity type, MX105-MX110-GS20 for the pore-cavity type and MX17-MX107-MX41-MX102-GS102 for the pore type. Moreover, depositional effects on reservoirs in terms of depositional sequences, seismic facies, microfacies and microfacies associations indicate that to some extent, the fracture-cavity type of reservoir is constrained by the top boundaries of PSS7, PSS2, parasequence 17 (PS17) and PS14; the pore-cavity type of reservoir is constrained by the top boundaries of PSS7, PSS4, PS18 and PS12; and the pore type of reservoir is constrained by the top boundaries of PSS7, PSS6, PSS3, PSS2, PS18, PS17, PS14, and PS12. Seismic facies associated with shoals and mound-flat complexes are related to the facies distributions of pore cavities and pore reservoirs. MA1, MA3, MA7, and MA8 are predominant microfacies associations of favourable reservoirs of the Deng IV Member in the Gaoshiti-Moxi area. The above results are significant for further petroleum exploration and exploitation of ultradeep microbial carbonate reservoirs in this area.

Prediction and balanced allocation of thermal power carbon emissions from a provincial perspective of China.

Carbon control in the thermal power generation industry is crucial for achieving the overall carbon peak target. How to predict, evaluate, and balance the allocation of inter provincial carbon emissions has a significant impact on the decision-making of reasonable allocation of inter provincial carbon emissions in the target year. Therefore, this paper uses Monte Carlo-ARIMA-BP neural network and ZSG-DEA model to conduct temporal trend prediction and carbon emission quota allocation research. We propose the "intra provincial and inter provincial" framework for carbon emissions trading in thermal power plants, which aims to break through the barriers in carbon emission rights exchange among provinces. The conclusions are as follows: (1) the growth trend of carbon emissions from thermal power is gradually slowing down and is expected to peak before 2030. (2) Inner Mongolia, Jiangsu, and Shandong have high input-output efficiency, and are all the main output provinces for carbon emission quota allocation. After being adjusted using the ZSG-DEA model, they can still be at the forefront of efficiency. (3) The "intra provincial and inter provincial" framework for carbon emissions trading can effectively predict and allocate the carbon emission demand of each province from time and space dimensions, balance the carbon emission rights and interests of each province, and provide forward-looking planning suggestions for inter provincial carbon emission rights exchange.

The Impact of Physical Activity Intensity on the Dynamic Progression of Cardiometabolic Multimorbidity: Prospective Cohort Study Using UK Biobank Data.

BACKGROUND: Although many studies have reported on the associations between the amount of physical activity (PA) and the transitions of cardiometabolic multimorbidity (CMM), the evidence for PA intensity has not been fully evaluated. OBJECTIVE: This study aimed to explore the impact of PA intensity on the dynamic progression of CMM. METHODS: The prospective cohort of this study using data from the UK Biobank included 359,773 participants aged 37-73 years who were recruited from 22 centers between 2006 and 2010. The diagnoses of CMM, which included the copresence of type 2 diabetes (T2D), ischemic heart disease, and stroke, were obtained from first occurrence fields provided by the UK Biobank, which included data from primary care, hospital inpatient record, self-reported medical condition, and death registers. The PA intensity was assessed by the proportion of vigorous PA (VPA) to moderate to vigorous PA (MVPA). Multistate models were used to evaluate the effect of PA intensity on the dynamic progression of CMM. The first model (model A) included 5 transitions, namely free of cardiometabolic disease (CMD) to first occurrence of CMD (FCMD), free of CMD to death, FCMD to CMM, FCMD to mortality, and CMM to mortality. The other model (model B) used specific CMD, namely T2D, ischemic heart disease, and stroke, instead of FCMD and included 11 transitions in this study. RESULTS: The mean age of the included participants (N=359,773) was 55.82 (SD 8.12) years at baseline, and 54.55% (196,271/359,773) of the participants were female. Compared with the participants with no VPA, participants with intensity levels of >0.75 to <1 for VPA to MVPA had a 13% and 27% lower risk of transition from free of CMD to FCMD (hazard ratio [HR] 0.87, 95% CI 0.83-0.91) and mortality (HR 0.73, 95% CI 0.66-0.79) in model A, respectively. The HR for the participants with no moderate PA was 0.82 (95% CI 0.73-0.92) compared with no VPA. There was a substantially protective effect of higher PA intensity on the transitions from free of CMD to T2D and from T2D to mortality, which reveals the importance of PA intensity for the transitions of T2D. More PA and greater intensity had a synergistic effect on decreasing the risk of the transitions from free of CMD to FCMD and mortality. Male participants, younger adults, adults with a higher BMI, current or previous smokers, and excessive alcohol drinkers could obtain more benefits from higher PA intensity for the lower risk of at least 1 transition from free of CMD, then to CMM, and finally to mortality. CONCLUSIONS: This study suggests that higher PA intensity is an effective measure for preventing CMM and mortality in the early period of CMM development. Relevant interventions related to higher PA intensity should be conducted.

hsa_circ_0000519 promotes the progression of lung adenocarcinoma through the hsa-miR-1296-5p/DARS axis.

Emerging research indicates that circRNAs serve a crucial role in occurrence and development of cancers. This study aimed to uncover the biological role of hsa_circ_0000519 in the progression of LUAD (lung adenocarcinoma). hsa_circ_0000519 was identified by bioinformatic analysis, and its differential expression was validated in LUAD tissues and cell lines. CCK8, colony formation, wound healing, transwell assays, and xenograft tumor models were used to observe the biological functions of hsa_circ_0000519. FISH, RIP, dual luciferase reporter assays, and recovery experiments were implemented to explore the underlying mechanisms of hsa_circ_0000519. hsa_circ_0000519 was significantly upregulated in LUAD tissues and cell lines. The expression of hsa_circ_0000519 was positively correlated with T grade and TNM stage in patients with LUAD. Downregulation of hsa_circ_0000519 remarkably reduced cell proliferation, migration, invasion in vitro, and tumor growth in vivo. Mechanistic investigation demonstrated that hsa_circ_0000519 directly sponged hsa-miR-1296-5p to reduce its repressive impact on DARS as well as activate the PI3K/AKT/mTOR signaling pathway. The malignant phenotypes of LUAD cells induced by upregulation of hsa_circ_0000519 could be rescued by hsa-miR-1296-5p overexpression or knockdown of DARS. In conclusion, hsa_circ_0000519 promotes LUAD progression through the hsa-miR-1296-5p/DARS axis and may be expected as a novel biomarker and therapeutic for LUAD.

Numerical and Experimental Analysis of Dual-Beam Laser Polishing Additive Manufacturing Ti6Al4V.

Laser polishing is an emerging efficient technique to remove surface asperity without polluting the environment. However, the insufficient understanding of the mechanism of laser polishing has limited its practical application in industry. In this study, a dual-beam laser polishing experiment was carried out to reduce the roughness of a primary Ti6Al4V sample, and the polishing mechanism was well studied using simulation analysis. The results showed that the surface roughness of the sample was efficiently reduced from an initial 10.96 µm to 1.421 µm using dual-beam laser processing. The simulation analysis regarding the evolution of material surface morphology and the flow behavior of the molten pool during laser the polishing process revealed that the capillary force attributed to surface tension was the main driving force for flattening the large curvature surface of the molten pool at the initial stage, whereas the thermocapillary force influenced from temperature gradient played the key role of eliminating the secondary roughness at the edge of the molten pool during the continuous wave laser polishing process. However, the effect of thermocapillary force can be ignored during the second processing stage in dual-beam laser polishing. The simulation result is well in agreement with the experimental result, indicating the accuracy of the mechanism for the dual-beam laser polishing process. In summary, this work reveals the effect of capillary force and thermocapillary force on molten pool flows during the dual-beam laser polishing processes. Moreover, it is also proved that the dual-beam laser polishing process can further reduce the surface roughness of a sample and obtain a smoother surface.

Hepatitis B virus promotes its own replication by enhancing RAB5A-mediated dual activation of endosomal and autophagic vesicle pathways.

Chronic hepatitis B virus (HBV) infection remains one of the major global public health concerns, and it develop into liver fibrosis, cirrhosis, and hepatocellular carcinoma. Recent evidence suggests that endosomal and autophagic vesicles are beneficial for HBV replication. However, it has not been well elucidated how HBV exploits such intracellular vesicle systems for its replication. RAB5A, a member of small GTPase family, plays crucial roles in early endosome biogenesis and autophagy initiation. We observed that RAB5A mRNA and protein levels were significantly increased in HBV-expressing hepatoma cell lines as well as in liver tissue samples from chronic HBV-infected patients. Moreover, RAB5A silencing inhibited HBV replication and subviral particle (SVP) expression significantly in HBV-transfected and -infected hepatoma cells, whereas RAB5A overexpression increased them. Mechanistically, RAB5A increases HBV replication through enhancement of early endosome (EE) - late endosome (LE) activation by interacting with EEA1, as well as enhancing autophagy induction by interacting with VPS34. Additionally, HBV infection enhances RAB5A-mediated dual activation of EE-LE system and autophagy. Collectively, our findings highlight that HBV utilizes RAB5A-mediated dual activation of endosomal and autophagic vesicle pathways for its own replication and persistence. Therefore, RAB5A is a potential target for chronic HBV infection treatment.

A rare BCR-ABL1 transcript in chronic myeloid leukemia: Case report and literature review.

BACKGROUND: The purpose of this report is to enhance our scientific understanding of the clinicopathologic features of chronic myeloid leukemia (CML) with the e12a3 transcript and to provide insights into potential treatment options for this rare subtype of CML. CASE SUMMARY: We present the case of a 21-year-old Chinese male patient who was diagnosed with chronic myeloid leukemia (CML) with the e12a3 transcript. Biopsy of his left iliac soft tissue mass indicated that he was in the blast crisis phase of CML. The patient was treated with tyrosine kinase inhibitor (TKI) drugs and achieved remission, but relapsed soon after. Despite receiving prognostic chemotherapy, the disease progressed and eventually led to the patient's death. CONCLUSION: To avoid missed diagnosis and misdiagnosis, it is recommended to conduct a thorough clinical evaluation and actively identify the underlying etiology.